Environmental Impact Prediction of a New Tire Vulcanization Activator

Thomas Hennequin, L. van Vlimmeren, Silvia Mostoni, Francesca Rita Pomilla, Roberto Scotti, Claudia Stauch et al. · 2024 · 8 citationsRead the paper

High Resolution Image Download MS PowerPoint Slide Zinc oxide (ZnO) is the most common curing activator used to manufacture tires. To minimize environmental impacts by decreasing the zinc content and rolling resistance of tires, ZnO nanoparticles (NPs) anchored on SiO 2 NPs (ZnO@SiO 2 ) are currently under development as new activators at the pilot scale. Here, we applied prospective life cycle assessment to predict the impacts on human health, ecosystem quality, and resource scarcity of synthesizing ZnO@SiO 2 for the production of passenger car tires at an industrial scale. We found that the life cycle impacts of the synthesis are expected to decrease by 89 to 96% between the pilot and industrial scale. The largest contributors to the synthesis of ZnO@SiO 2 were electricity consumption and waste treatment of the solvent. Using the new activator for tire production led to potential reductions of 9 to 12% in life cycle impacts compared to tires that are currently in use. Those reductions were due to the expected decrease in rolling resistance, leading to lower fuel consumption, which outweighed the additional environmental impacts of the synthesis, as well as the potential decrease in lifetime. Our work highlights an opportunity for manufacturers to mitigate their impacts over the full life cycle of the tire.

2 ideas Seedlabs derived from this research