Challenges and Solutions to Meet the Euro 7 NOx Emission Requirements for Diesel Light-Duty Commercial Vehicles
Theodoros Kossioris, Robert Maurer, Stefan Sterlepper, Marco Günther, Stefan Pischinger · 2024 · 11 citationsRead the paper
Abstract The improvement of air quality requires a further reduction of pollutant emissions, especially in urban areas. The Euro 7 regulations aim at the development of a new generation of internal combustion engine vehicles capable of achieving ultra-low pollutant emissions under demanding, real-world operating conditions. They introduce new technical challenges in the holistic design of a vehicle’s powertrain and emission control system. To identify these, four real-world Euro 7 driving scenarios are investigated, covering demanding urban, highway and mountain driving situations. Technical solutions are then presented to address these challenges and ensure compliance with the Euro 7 emission requirements as set out in the latest regulation proposal of the European Commission. The study focuses on the NOx emissions of an N1 Class III light commercial vehicle with 3.5 t mass and a P2 diesel mild-hybrid powertrain. To ensure emission compliance, a Euro 6e exhaust gas aftertreatment system with enlarged catalysts is combined with NOx raw emission improvements. For low-load cold starts, a 4-kW electric heater in the exhaust system is considered in addition to a 2-l DOC and a 6-l DPF with SCR coating. For high-load cycles with high raw emissions, a 10-l underfloor SCR is considered to ensure the necessary deNOx performance.
4 ideas Seedlabs derived from this research
A hardware upgrade package for light commercial vehicles featuring enlarged SCR catalysts and integrated electric exhaust heaters to meet strict urban NOx limits.
AI score 83/100A specialized, high-volume (10L) Selective Catalytic Reduction (SCR) catalyst module designed for underfloor installation in light commercial vehicles to handle high-load NOx emissions.
AI score 76/100An engineering toolkit and embedded dosing strategy that coordinates a close-coupled SCR-coated DPF with a large underfloor SCR, optimizing urea injection across high-load highway and mountain cycles to guarantee deNOx performance.
AI score 54/100A control module that uses route and load prediction to pre-heat a 4-kW exhaust electric heater just in time for cold starts and low-load urban driving, minimizing NOx breakthrough while limiting energy draw on mild-hybrid diesels.
AI score 52/100